Wardrobe door making materials classification wardrobe door advantages and disadvantages Appreciation

[China] net production wardrobe closet door wardrobe only an important criterion of good or bad, it's also a lot of sheet metal type selected, the network today, the Chinese wardrobe closet door production material classification, you need to select the appropriate sheet was produced according to the actual situation.

Wardrobe door making material classification - leather door panel

The texture of the leather itself is very good, it feels very comfortable to touch, because the softness of the leather door panel makes the door panel made very comfortable. If it is matched with the appropriate decoration style, it will also have a good decorative effect. If there are children in the family, the choice of this kind of plate is also very good for protecting children's health and safety, but the door panel of this material is easy to scratch, so we need to carry out targeted protection according to its characteristics, remember to cut Do not use anything that is too hard or sharp to avoid physical damage. When cleaning, use a soft rag to wipe it.

Wardrobe door making material classification - solid wood door panel

In general, consumers are encouraged to use solid wood particle board. Because of its texture, the board gives a natural and simple feeling. The wood is made into clastically pressed pieces. The crumbs are like tea leaves in cross section. The medium density board is made by pressing the wood into a crushed piece. Compared with the two layers, the permeability and moisture resistance of the solid wood particle board are better. Most of the panels now use double-panel panels. If the quality of the products is not enough, the panels will be yellow under the sunlight. The average consumer can't see the difference with the naked eye. The best way is to identify the brand. Solid wood door panels are made of some precious hardwoods. When cleaning, choose a professional cleaning agent to prevent the door panels from being eroded. When cleaning, spray the cleaner onto the rag and wipe regularly until the surface is clean.

Wardrobe door making material classification - glass door panel

Polycrystalline glass and tempered glass have recently been included in the selection of new varieties. Glass in various forms such as bright glass, frosted glass, silver-plated glass and cloth-like glass are used on the door. Polycrystalline glass is processed from ordinary glass. It is made of high-tech and special materials on the other side of the glass. The colors and patterns can be selected at will, and the selectivity is extremely strong. The tempered glass is close to the tempered glass. When the tempered glass is introduced, the merchant adds a film to the back of the tempered glass, which is five times stronger than ordinary glass and has extremely high safety performance. Glass gives a illusory feeling of crystal clear or obscured. If you choose a glass door panel, for the cleaning of the glass door panel, it is recommended to use glass water as a cleaning agent, supplemented by newspapers, because the glass door plate is stained. The fibers will become coarser.

Wardrobe door making material classification - aluminum door panel

The aluminum alloy is very strong and not easily deformed. At the same time, it can be used for a long time without rust deformation. Moreover, the price of this material is very suitable if it is cleaned with detergent or glass water. If it is cleaned, it will cause the aluminum alloy to lose its original luster. For this case, wipe it directly with a towel, or after losing the luster, use a professional aluminum alloy cleaner to restore the original luster.

Mesh Table and Chair Set

Metal Patio Set,Outdoor Table Chairs,Mesh Table And Chair Set,Outdoor Patio Table And Chairs

Hangzhou Doyen Mechtronic Co.Ltd , https://www.doyenhz.com