![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
In the above, the above points explain the problems that should be paid attention to during the relocation process of the high and low temperature test chambers. Then, what are the requirements for the indoor environment after the equipment is transported to the designated location?
4. The high and low temperature box should be installed away from the heat source and not exposed to direct sunlight. Because it needs to communicate with the outside world during work, it will dissipate heat to the outside through the condenser. The higher the external temperature, the slower the heat dissipation and the more power consumption. , resulting in poor cooling efficiency.
5. The high and low temperature test chamber should be placed in a place with low humidity, because the casing, condenser and compressor are all metal materials. If the air humidity is too high, these parts will rust and shorten the service life of the test box. . At the same time, the humidity is too large, which will cause condensation on the outside of the test chamber and affect the electrical function.
6. The high and low temperature test chamber should be placed in a flat and well ventilated place, which can reduce the vibration and noise when the compressor is running.
7. After reaching the designated location, it takes 2-3 hours to be energized to ensure the service life of the compressor. Since the refrigerant is shaken after the compressor is transported, the impurities in the refrigerant must be precipitated. Operation, otherwise the high and low pressure valves will be blocked when the compressor delivers the refrigerant, resulting in a decrease in cooling effect.
Summary: High and low temperature test chambers must pay attention to these problems during the handling process. In addition to being cautious during the handling process, it is necessary to know the handling skills of the high and low temperature test chambers.
Double Arm Manual Medical Pendant
ICU Arm bridge for the hospital ICU wards, intensive care unit of modern medical rescue necessary auxiliary equipment,mainly by the bridge dry and wet sections, characterized by the separation of wet and dry is reasonable structure ,allocation of landing and taking off the wet paragraph flexible and fluid infusion pump rack frame and infusion pump mount.
The moving parts adopts Damping Friction Brake system, while also matching your request in accordance with paging communications ,monitoring ,video telephony, background music ,as well as teaching and long-distance diagnosis system.
High strength aluminum alloy, anti-corrosion, easy to clean.
The bridge was subdued.
THE EXHIBATION
Double Arm Manual Medical Pendant,Anesthesia Medical Pendant,Double Armed Pendant,Operating Theatre Pendants
Shandong qufu healthyou Medical Technology co.,Ltd , https://www.kangerjian-medical.com