Self-adhesive constant temperature and humidity test box equipment structure

The self-adhesive constant temperature and humidity test box is also called the constant temperature and humidity test box. Its equipment structure mainly shows the following four aspects:

    (1) The chamber of the test chamber is in the form of an integral structure. The refrigeration system is located in the lower rear part of the box and the control system is located in the upper part of the test box.

    (2) In the air duct at one end of the studio, distribution heaters, refrigerating evaporators, fan blades and other devices; the left side of the test box is equipped with Ф 50 cable holes, and the test box is a single door

    (3) The use of double layer high temperature resistant anti-aging silicone rubber seal can effectively guarantee the temperature of the test chamber.

    (4) The box door is provided with a detection window, a frost prevention device and a switchable control light. The inspection window uses multi-layered hollow tempered glass and the inner bonded sheet type conductive film is heated and defrosted. The use of imported brand Philips lamps for the lamps enables effective and comprehensive inspection of laboratory changes.