![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Panel furniture has always given the impression that it is synonymous with low-end products. In fact, many panel furniture has been registered in the elegant hall. Some high-end panel furniture is more expensive than solid wood furniture. In the furniture market, many of the more elaborate workmanship and more beautifully-painted panel furniture, the price of a set of living room audio-visual cabinets is as high as 10,000 yuan. .
Furniture is aesthetically pleasing and stylish, and should be designed with comfort and convenience in mind, while still being durable and easy to maintain. From this point of view, panel furniture can best reflect the essence of furniture. Therefore, whether the quality of furniture is plate or solid wood is not the focus of the study, the material and the craft can finally determine the grade of the plate furniture.
Plate furniture materials are obviously
Sheet furniture is a piece of furniture made of artificial boards and connected by hardware. Common artificial boards include plywood, blockboard, particle board, and MDF. Plywood is often used to make furniture that requires bending and deformation; the performance of blockboard is sometimes affected by the core material; the particleboard is loose and used only for low-end furniture. The most cost-effective, most commonly used is medium density fiberboard (MDF). The common finishing materials for panel furniture are thin wood (commonly known as veneer), polyester lacquer (commonly known as baking varnish), melamine finish, wood grain paper (commonly known as sticker), PVC rubber sheet, etc. The latter two finishes are often used for low-end furniture. Among them, natural veneer finishes and piano paints are used for medium and high-end products, and melamine finishes are more common in mid-end furniture. At present, the veneer of some panel furniture on the market is more and more realistic, and the gloss and feel are good.
The combination of panel furniture usually uses a variety of metal hardware, so the quality of hardware is also an important factor in distinguishing the quality of panel furniture. If you choose high-quality hardware from Italy or Japan, the furniture will definitely not go bad.
Plate furniture is often criticized for environmental protection. Some manufacturers produce materials such as particleboard, and if the veneer is not completely sealed, it is easy to release formaldehyde harmful to the human body. Consumers can open the door or drawer to smell when buying, if there is a strong irritating smell, it is not suitable to buy.
Not suitable for water soaking to prevent edge cracking
Therefore, the substrate is also good, the finish is also good, the edge is the key to the panel furniture. The advantages and disadvantages of the edge-sealing material, whether the edge banding is uneven or lifted. It is important to note that it is not sealed on all six sides. That is, the formaldehyde-free adhesive is used, but the artificial board has more or less volatile gases in the production process, and the sealing is strict, which is of course beneficial to the environmental protection of the living room.
Relatively speaking, melamine finishes are better than other finished furniture. The melamine board's veneer is extremely wear-resistant, scratch-resistant, acid and alkali resistant, and generally requires no special maintenance. However, it is important to note that melamine should not be soaked in water for a long time during use to avoid cracking of the edge. The most prone to water cracking is the wood-paneled panel furniture.
If there is cracking or breakage of the veneer, you can use the following method: first put a damp cloth in the broken place, then put a hot iron on the damp cloth, forcing the moisture into the veneer, making the veneer very tough and not easy. Fragmentation. In this way, the old glue can be scraped off first, then a layer of milky white glue is applied on the base wood, and then a new layer of glue is applied on the reverse side of the loose veneer, and the glue is completely dried.
The paint process is getting more and more advanced
In the low-end panel furniture, you can also see the traditional painting process. The middle and high-end panel furniture is mostly painted. At present, the best piano paint is the most commonly used surface technology for panel furniture.
It is understood that the most current baking lacquer is eight layers, and the general quality lacquered furniture is six layers of lacquer. Some people think that the plate-painted furniture is slick, because there is a plate inside, but there is also a view that the lacquered furniture is generally not sealed, and the formaldehyde of the plate is sealed with baking varnish, which not only solves the problem of environmental protection of the panel furniture, but also has a more dazzling appearance. More diverse colors, especially the most popular piano paints in modern furniture.
The base of the paint furniture is generally medium-density board. The surface is polished, primed, dried and polished. It is divided into three types: bright, matt and metal paint. The advantages are bright color, strong visual impact, moisture resistance and waterproof performance. superior. Easy to clean, no oil, no fading. Since the coating is cured, the stability, durability, weather resistance, abrasion resistance, corrosion resistance and hardness of the coating are high. After polishing, the surface finish is high and the mirror effect is good, which is widely used in high-grade furniture.
However, there are still many questions circulating on the Internet. Most netizens believe that once the paint is damaged during use, formaldehyde will be released.
kitchen cabinet,modern kitchen, black kitchen,white kitchen cabinets
Guangdong Planet Cabinetry Co., Ltd. , https://www.ptkitchencabinet.com