How to color peach wood products

There are three ways to do this.

First, the set of water color, you can use iron red, iron yellow, black on the white embryo bottom, the proportion of your own control. Tune into the color you want, then color. After drying, the varnish can be used to achieve the effect.

The second is to use nitrocellulose lacquer or other varnish, depending on whether you use matt or bright lacquer. Add a special color fine once and apply it thinly, and finally you can achieve the effect.

The third is to use oil to color, oil is the best thing to do, but depends on whether you can master it. It can call up any color. Some can be done directly on the bottom, but it is easy to spend, the most is to do the primer once or twice, then do the oil, and then spray the desired matt or varnish. Most of the engraving products use nitrocellulose lacquer, which is generally not colored. The pursuit of nature is natural. Generally, the color of the engraved products will be deep after varnishing. Therefore, it is necessary to pass the small top coat or the remaining head test to be colored, and it is not possible to directly apply to the product.

Wastepaper Basket With Ashtray For Hotel

Waste Garbage Bin,Outdoor Garbage Bin,Small Waste Paper Basket,Commercial Garbage Can

ZHEJIANG ERHUI TECHNOLOGY CO.,LTD , https://www.jahhome.com