PT-125 plate machine product technical features, washing form: immersed development plate design, development, washing, gluing, drying, one-time automatic completion; man-machine interface: large LCD display, six-button operation, machine function and The operating status is clear at a glance, this article will introduce you to Hengyu Rising Machine.
The development of a plate printer means a process of expressing a latent image which is formed by exposure on a film or a plate by using a reducing agent. The development of the PS version is to have the printing layout and layout performance that meets the printing requirements when the graphic is displayed.
According to the working principle of the purple laser newspaper CTP, after the printing plate enters the CPT, it needs to be preheated and solidified first, then passes through the brush to the developing solution tank, and waits until the printing plate comes out of the developing solution tank. The procedures of washing, gluing and drying are started, and finally the finished product can be produced.
It can be known that under normal circumstances, the brush roller needs to be rotated in time to ensure that the film on the printing plate can be cleanly cleaned; the developer replenishing pump needs to be added in time when the developer is insufficient, and the developer solution is not sufficient. Need to add again.
Use the special cleaning agent for the platen machine, just dilute the concentrate with water, heat it to the developing machine tank and heat it to 30 °C, and start the cycle for 30 minutes to clean the dirt in the tank. Or dilute the concentrate with water, dip with a brush, brush the tank, rubber roller and brush. Please refer to the product's instruction manual for the specific dilution ratio.
Article source address: http://
Vacuum Water Bottle,Vacuum Insulated Bottle,Double Insulated Water Bottle,Thermos Vacuum Insulated Bottle
YONGKANG SONGDAO ELECTRICAL CO., LTD , https://www.sodobottles.com