Hangzhou Machine Works and Zhongda Dentsu R&D cutting machine succeeded

The new infusion tube cutting machine developed by Zhongda Dentsu and Hangzhou Machinery Research Institute has been successfully developed. After commissioning, it has now been produced normally at Kaile Infusion Pipe Factory in Shanghai!

Infusion tube cutting machine is a commonly used industrial machinery in the medical device industry. It is used in conjunction with plastic extruders to produce medical infusion tubes. As the response speed to the servo motor and PLC is very high, most current cutting machines in China cannot be synchronized with the extruder, and can only be manually wound and cut after plastic extrusion molding, resulting in a greater material waste. However, imported machines are expensive and cannot meet the general needs.

In the face of the urgent needs of the market, Hangzhou Machinery Research Institute and Zhongda Dentsu Co., Ltd. worked together to give full play to the advantages of superior technology and products, developed a new type of infusion tube cutting machine, and improved the automation level of the medical device industry. The new infusion tube cutting machine system consists of Delta VFD004S21A inverter, DOP-A57GSSTD, 14SS00T2 human-machine interface, 08SNPLC expansion module and ASMT04L250 servo and driver. The machine has high response speed and can be operated synchronously with the plastic extruder. When the extruder pushes the plastic tube out and cools, the cutting machine can cut at high speed of 90m/s and the cutting size can be from 130mm to 1500mm. Randomly adjusted. The successful development of this machine has, on the one hand, improved the degree of automation of domestic cutting machines, enabling domestic manufacturers to purchase infusion tube production lines with extremely cost-effective advantages, and has greatly increased labor productivity. On the other hand, it once again demonstrated the comprehensive strength of Zhongda Mechatronics Solutions and won praise from users.