Hamada Introduces New Printing Technology for Packaging Paper Products

Japan Hamada Printing Machinery Co., Ltd. is the world's leading manufacturer of packaging and printing paper products. The U.S.-made U.S.-resistant J Series equipment was recently developed by the company and can be adapted to models of many varieties and small batch production. The user can select the color number, slotting part, die cutting part of the printing part according to his own production line. Economically reasonable.

The new technology of packaging paper printing machinery has the following characteristics:

One is to load the CNC system (computer data system). When the customer selects a different job or speed type, the device's error can also be maintained at an accuracy of ±0.5 mm. In the CNC system, the instruction storage device can store up to 10,000 instructions. In the course of future operations, only an instruction can be called from the CNC to perform the job. Thanks to the centralized CNC system, all are automatically controlled by the computer, and even if the equipment does not have skilled operators, it can guarantee the production of high-quality products. The second is to use a separate drive control system for each component. Each component is equipped with a servo motor, independent tuning, phase control, thereby reducing the printing error. Improve the accuracy of printing and slotting. Ensure the high quality of paper products, especially the printing of corrugated paper. Thanks to the use of a servo motor that can be adjusted in units of 0.1 mm, traditional gear drives are eliminated, the failure rate is reduced, the operating environment is optimized, and noise is reduced. The third is the use of a scraper board feed. The paper feeding surface adopts a vacuum suction system. This ensures that the paper can be fed smoothly regardless of the size, shape and curvature of the paper. The scraper unit also has a built-in motor, scraper arms, and connecting rods, eliminating the traditional sliders and screw shafts. The structure is simple and the paper feeding is smooth. The fourth is that the slotted portion and the die-cutting portion are automatically controlled by a computer. The depth of the paperboard press line and the position adjustment of the slotted knife are fully controlled by the computer, and can also be finely adjusted by the electric motor, thus ensuring stable and accurate groove processing. The die-cutting section standard is the upper shaft loading die-cutting plate fixing roller. The lower shaft is equipped with a polyurethane roller. In addition, the folding gluing part of Meideba-J also implements full computer control. For the pressing lines, the folding guide can be adjusted to the optimal position according to the shape of the different camber. The gap of the support roller can also be automatically adjusted according to the shape of the different files. Adjustment to ensure high-precision joining. The counter discharge unit adopts a bottom-up stacking method originally developed by Japan Hamada Co., Ltd. to adapt to high-speed and stable deposition, solves the paper jam problem of the counter holding unit, and ensures the smooth deposition of paper.