Cycling Lesson: How to Prevent the Bicycle Chain from Breaking [Photo]

When the bicycle chain is old and damaged, what kind of crisis will it run into? Chain dropping may be easy to solve, but it also directly predicts that your chain is quite old. The broken link is an unexpected situation that cannot be resolved. You must carry the repair tool at any time and reconnect the chain in the middle to restore the original status.

After ending such long-distance riding distance, not only is it consuming its own physical fitness, but also because of long time stepping on heavy teeth or at the same time shifting speed, it also adds muddy and wet riding conditions, causing the chain to get stuck in too much dirt, and on the chain. During the alternation of the lower chain, the wear of the chain is increased and its life is shortened.

What are the crises that will be encountered in the old and damaged chains?

If you neglect the maintenance chain for a long time, then clean it regularly, oil it, chain will get stuck in the environment because of many dirt after many uses, make the chain lose its function, can not easily transform your top The chain and the chain directly cause the ride to go wrong and there is a kind of kaka feeling.

Bicycle broken chain

Breaking and chain dropping during riding

This is definitely the case that players and riders are most afraid of when they are riding.

Dropping the chain may be easy to solve, but it also directly predicts that your chain is quite old and easy to loosen, losing its original flexibility, and will diminish the effect and significance of speed change.

The broken link is an unexpected situation that cannot be resolved. You must carry the repair tool at any time and reconnect the chain in the middle to restore the original status.

It is advisable for riders to knock down the broken chain first, and then use a snap to temporarily engage the two ends before they have a way to continue short-range riding; of course, the best advice is to use an electronic caliper or simply Snap gauges, measured in units of eight eyes, carefully check whether your chain exceeds elongation to ensure the life of the chain.

Maintenance and cleaning chain standards

When you find that the effect of shifting speed is not good during riding, it will produce a loose or unsmooth state. Even when it is running, noise will appear. This is to remind you that the chain urgently needs to be sorted out!

In general, the use of the chain depends on the rider. Even if your riding environment is not too muddy, but also at least one month maintenance, not only can increase the sliding speed of the chain to increase the speed, but also more accurately align the upper and lower chain connection points, from the chain.

Bicycle chain maintenance

Correct maintenance and cleaning process

Using the correct maintenance and cleaning process can increase the life of the chain more effectively; instead of taking a bike to a professional store, it's better to learn the DIY process, which is more convenient to handle at home, not only saving a lot of maintenance costs, but also close to your own bicycle.

Many riders are used to immersing the chain in detergents. After a while, they pick up and clean thoroughly. Even in order to remove the rust and use highly aggressive herbicides, this method can cause great damage to the chain!

The cleaning agent penetrates through the chain and overstretches the details of the chain, causing it to overclean and erodes the surface of the chain. The entire texture of the chain becomes vulnerable to damage due to external forces. It is very fragile and easier to break!

Then, further dripping chain maintenance oil in the bearing, and turn the pedal, so that it enters the contact surface of the chain and the tooth plate, the maintenance oil into the better, and then use a white brush to evenly spread the maintenance oil on the chain , The excess oil and then wipe back and forth with a rag, the average oil distribution can be.