[ China Wardrobe ] For the young people who live in rented houses, if our rental house has this cloth closet , we can save the room area, and the price is low, it is very convenient to disassemble and install. That is to say, when you move, you will not lose too much. Below, Xiaobian will introduce you to the installation method of the cloth wardrobe in detail, and friends who are interested can come and find out!
Cloth wardrobe
Cloth wardrobe assembly method? Check packaging and accessories
First of all, when receiving the goods, whether it is express or direct purchase, be sure to check whether the packaging is seriously damaged. If there is, it is likely that the steel pipe inside is also crushed. Such goods must not be signed and purchased. Check clearly. Open the package, and then check whether the accessories inside are complete. There is a manual, check the instructions. If there are few, it is estimated that you can't install it without using it. Therefore, the number is clear in advance, so as not to be wasted. When installing, it must be Wear gloves and be sure to read the instructions carefully.
Cloth wardrobe assembly method? Cloth wardrobe bottom installation
First install the bottom one, take out the four-way joint with the bottom and the high, and connect with the short tube in the middle. Install a four-way joint on each side, then install the tube on both sides, decide the position of the place, and install the long tube. Short tube. Then install the base fabric on both sides, and then install a three-way joint around each other. After installing the bottom, insert six short steel pipes, and then put the whole wardrobe cloth up against the surrounding holes. Then install a layer of partition like the bottom, and then put it on the six steel pipes.
Cloth wardrobe assembly method? Cloth wardrobe steel pipe installation
If the wardrobe is divided on two sides, first install the short-side floor, first insert the side steel pipe, then install the cloth, then connect the four-way joint, then install two horizontal steel pipes, then install the cloth, then Then make up the four-way joint on both sides. Repeat the baffle until it is attached to the top. After the short side baffle is installed, the long side is a vertical hanging area with a three-way joint connecting the two long Tube, until the top. After both sides are installed, connect them directly with long steel pipes, so that the wardrobe is installed. If the wardrobe is too high and not enough to squeeze, it is recommended to push the side backwards so as not to be installed. It can also be mounted with a hook connector, which is relatively simple. When setting the top cover, it is best to pull the bottom to the top so that there is space to pull up until the top corner is installed. At this time, the cloth cover can be pulled down. The wardrobe is installed.
I believe that many young people have read the contents of the article, they should know the method of assembly of the cloth wardrobe, is it very simple? Here Xiaobian wants to remind the consumer that even if the price of the cloth wardrobe is not high, but choose cloth When you are in the closet, you should also pay attention to the quality of the cloth wardrobe, and choose the products produced by regular manufacturers as well. Only in this way can the cloth wardrobe have a sufficient service life.
eyebrow brush.Angled eyebrow brush: can draw fine eyebrow shape, divided into two kinds of hard-haired eyebrow brush best and soft-haired eyebrow brush best. Spiral eyebrow brush: Spiral eyebrow brush has two functions, one is to brush off excess brow powder on the eyebrows, and the other is to brush away the clumps on the eyelashes. Hard eyebrow brush: It can straighten out the trend of eyebrows and make the cluttered eyebrows smooth.
Brow Brush,Eyebrow Brushes,Eyebrow Brush Up,Eyebrow Brush Best,Eyebrow Brush Angled,Spoolie Eyebrow Brush,Eyebrow Brush set
Shenzhen Nanfang Shishang Cosmetic Utensil Co., Ltd. , https://www.nfbrush.com