Wooden door 5 major problem solution

At present, the wooden doors on the market can be said to be varied and have everything. During the use process, there may be problems such as deformation, cracking, and shrinkage of the wooden door. I don’t know how to deal with it. Then, let's talk to you today about the solutions to the five major problems of wooden doors!

First, the wooden door deformation

the reason:

1. Due to the influence of climate, the expansion of wood or paint leads to product deformation

2. Product deformation caused by excessive moisture content of wood

3. Problems caused by long-term exposure of the sun in the sun

Solution:

Slight deformation can be handled by pressurization, and in severe cases it needs to be returned to the factory.

Second, the wooden door cracks, shrinks, bumps

the reason:

1. Cracking of logs, due to climatic reasons or severe knocking during installation, pressurization may cause cracking (generally the door line).

2, the door cover and the door cover, between the door sleeve line and the door sleeve line due to the thermal expansion and contraction characteristics of the wood, due to the influence of humidity and temperature will cause a certain contraction joint.

3. Inadvertently causing the product to be bumped during the handling process, or causing damage to the door corner during installation.

Solution:

General cracking, shrinking and bumping can be repaired by the manufacturer's own paint repair agent. If the area is large or the damage is serious, the wooden door also has a professional beauty repairer to turn the decay into magic.

Third, wooden door bubble degumming

the reason:

The temperature is too high during processing or uneven coating or wood shrinkage.

Solution:

If it is not serious, the beautician can re-polish and paint on site. Unable to repair or the bubble continues to spread, it is recommended to redo the order.

Fourth, the door automatic switch

phenomenon:

Under normal circumstances, if the installation is in place and the wall is positive, the door should be able to stay at any angle when it is opened, but some doors will automatically open or close automatically.

the reason:

First, the vertical direction of the door may not be right, and secondly, the wall may not be standard, and the thickness of the wall of the hole may be inconsistent.

Solution:

During the installation, the operator can use the infrared level to adjust the door cover and the door leaf. Regardless of whether the wall is standard or not, the door cover should be installed vertically to ensure that the door is installed vertically.

5. There is a gap between the door line and the wall.

phenomenon:

After the door set is not exactly sewed with the wall, there are some gaps, and the light-colored door is more obvious.

the reason:

First check if the door cover is straight. If there is no problem with the door cover, it means that there is a problem with the wall. The thickness error on both sides and above the wall of the hole is large.

Solution:

The problem of the wall belongs to the quality of the previous construction. If it is a dark door cover and the gap is not obvious, it is recommended not to handle it; if it is light, it can be filled with white glass glue.

Document.body.oncopy = function () { setTimeout( function () { var text = clipboardData.getData("text"); if (text) { text = text + " This article comes from China Wooden Door Network, China's well-known wooden door industry portal Website! (http://) Detailed reference: "+location.href; clipboardData.setData("text", text); } }, 100) }

Hand Push Brush Cutter

Hand Push Brush Cutter,Skid Steer Brush Cutter,Brush Cutter With Wheel Machine,Grass Trimmer With Wheels

Shaoxing Haotuo Machinery CO., LTD. , https://hotochainsaw.com