Three ways to buy mahogany furniture

Before buying solid wood furniture, you must understand some knowledge about solid wood furniture, otherwise it is easy to fall into the trap of "being pit", especially these three sentences do not blur.

The first sentence: "Why is the gap between the corners of solid wood furniture so big?"

When buying solid wood furniture, many consumers see the corners of furniture, especially the surface of furniture such as dining tables and coffee tables. There is such a question. "The surface of this furniture is too rough, the corner gap is so large, and it is still on the surface. I don't know how to do it fine." If you have such doubts and say it, then you must be a layman in the business. When he introduces a product, he will "blow" unscrupulously, and you can't tell the truth.

Expert analysis: According to the physical characteristics of wood "thermal expansion and contraction", solid wood furniture will retain expansion joints.

The high-end solid wood furniture will leave a gap that is not wide or narrow at the side. In fact, this gap is not rough, nor crack, nor is it a mistake made. It is the expansion joint or shrinkage joint of solid wood furniture. On the contrary, the expansion joint is intentional and it is the wisdom condensation of traditional Chinese wooden furniture processing. The expansion joint is based on the physical characteristics of the wood "thermal expansion and contraction", leaving enough space for the wood to be deformed and cracked under different temperature and humidity conditions to prevent the furniture from being deformed and cracked, in order to prolong the service life of the wooden furniture.

However, the width of the expansion joint is not without requirements, not the bigger the better. The width of the expansion joint is determined by the specific gravity of the wood and the regional climate characteristics of the final furniture used. The width of the expansion joint is generally within 0.3 cm - 0.5 cm, and it is ugly to exceed 0.5 cm.

The second sentence: "Why is the same set of furniture, the color is not the same?"

Expert analysis: Wood furniture with the same material influenced by wood properties and processing methods has a slight color difference.

Whether it is a replacement or a shopping mall, we will find that the same series, the same material furniture, there will be some color difference. Due to the nature of the wood itself and the wood cutting method and environmental factors, solid wood furniture of the same material is difficult to achieve no color difference, as long as the color difference control is within the acceptable range is normal.

In the same tree, the color near the center of the tree and the root of the tree will be darker, and the color near the treetop and bark will be lighter. Although made of solid wood furniture, workers will be processed or even selected on the material selection, but it is impossible to have exactly the same plate, so paint will be used to avoid chromatic aberration when painting. If the color difference of a piece of furniture is a quality problem, if the overall color of the furniture is consistent, the slight chromatic aberration of different furniture is allowed.

The third sentence: "Wooden furniture is not environmentally friendly, how is there smell?"

The environmental protection of solid wood furniture is also a major goal of many people purchasing solid wood furniture in recent years, but some people will go into the solid wood furniture exhibition hall and say, "Isn't it said that solid wood furniture is the most environmentally friendly? How can there be such a clear smell?" There are not many consumers who have ideas, especially when buying pine furniture, many consumers will have such doubts.

Expert analysis: The wood itself has an odor. If you check the environment, you can ask for a quality inspection report.

Further reading: 1Teach you to distinguish between leather furniture and solid wood furniture

A scent does not mean that it is not environmentally friendly. Consumers must have a correct understanding. The smell of solid wood furniture has three sources: 1. The smell of natural wood. 2. The taste of the glue used in sheet metal processing. 3. Paint smell.

The wood itself has some taste, and the wood contains resins, gums, aromatic oils and other substances. If you want to know if these odors are harmless to the human body, you can ask the business to ask for an environmental test report. The report is a powerful proof of whether the solid wood furniture is environmentally friendly.

Dinner Set

Dinner Set,Stoneware Dinner Set,Stoneware Dinnerware,Ceramic Dinner Set

Guangzhou Concept Home Ltd , https://www.concepthomelimited.com