Three-door wardrobe installation map makes the wardrobe installation easier and more convenient

[ Chinese wardrobe net ] Wardrobe plays an important role in modern home life. As people's needs grow, the variety of wardrobes on the market is also more abundant, and various styles and sizes are emerging. The interior of the three-door wardrobe is just right, it won't take up too much space, it can also be enough to store clothes, and the beautiful three-door wardrobe adds a lot of color to our bedroom, but how to install it when the wardrobe is bought? Three-door wardrobe installation map effect and detailed installation introduction, everyone to study how to properly install it!

First, after the furniture board comes back, we need to open the package to check whether the board is intact, there are no scratches and cracks. If there is no problem, we can proceed to the next step. We will prepare the installed tools and put the Phillips screwdriver newspaper or The carton is laid on the ground.

Then, the plates of the three-door wardrobe are sorted according to the categories. If there are separate drawers or hangers, you can put them together and use them when you want them to be used.

We should try to avoid errors during the installation process, otherwise it would be too much trouble to rework. Then we have to connect the four base combination panels of the three-door wardrobe with the base plate, then slowly screw in the black screws, so that the base combination plate and the base plate are more firmly connected, and the screws must be tightened to avoid the time. Loose. Then screw the previously prepared black screws and metal screws into the screw holes on the base. The side plates and the back plate should be screwed to the corresponding positions at the same time.

Put the board of the three-door wardrobe in the middle, put the backboard on the ground, screw the two boards together, and tighten them. The boards of the other three-door wardrobes are also placed in the position that should be in, pay attention to the direction of the board. This tightens the body of the cabinet and almost combines. The body of the base and the cabinet should also be screwed together tightly, and then the drawer hanger or the like can be installed.

After the cabinet of the three-door wardrobe is installed, the sliding rails on the upper and lower sides of the wardrobe are respectively fixed on the upper and lower sides of the cabinet. Then we carefully put the closet door in the track like a window, so that the three-door wardrobe was basically installed.

The above three-door wardrobe installation diagram effect and installation steps are introduced here, we must be very careful, it is very important for the installation process.

Night Stand

White Nightstand,Mirrored Nightstand,Floating Nightstand,Black Nightstand

BOSA FURNITURE CO.,LTD. , https://www.bosafurniture.com