The role of the water tower in the high and low temperature impact test chamber

As we all know, the high and low temperature impact test chamber has a rapid impact and rapid temperature change, so the cooling power will be much higher than that of the ordinary high and low temperature test chamber, and the air-cooled cooling method may not be able to meet the requirements, so the general manufacturer will configure the water-cooled refrigeration. system. The water-cooled refrigeration system must match the installation of the water tower to operate.

Therefore, the water tower is an essential configuration for water-cooled refrigeration equipment. Its working principle is that when the circulating water system is installed with the cooling water tower, when the high-temperature water flows through the inner chamber of the cooling water tower, the cooling water tower sprays the high-temperature water stream into the inner cavity with high temperature resistance by spraying (the function of the filler is Increase the contact area with high-temperature water, under the continuous contact cycle of air and water, to achieve the effect of cooling and cooling, and then the tower-top fan can quickly drive the rapid circulation of the gas flow inside the tower, which will be accumulated inside the cooling tower. The hot air flow after the heat exchange of water is continuously taken out to enhance the cooling effect.)

The water tower of the high and low temperature impact test box is mainly used for heat dissipation of water-cooled equipment during cooling. Everyone knows that high-low temperature impact test box must have heat dissipation problem to be cooled, and some low-power equipment will not match if it dissipates heat. The air-cooled cooling method (that is, the wind is taken away by the wind in a fan-like configuration). The water-cooled equipment mainly uses water as a carrier to take heat away to achieve a cooling effect.

The unit of the water tower is cold tons, and the commonly matched specifications are: 10 tons, 15 tons, 20 tons, 25 tons, 30 tons, 40 tons, 50 tons.

The general standard 100L or 150L, ​​250L test box is best to match more than 15 tons of water tower, if you do not know the custom equipment should match the number of water towers recommended to increase the price for the manufacturer to install, or ask the manufacturer of the production equipment corresponding equipment should match How many tons of water towers are more safe to purchase.

The role of the water tower in the high and low temperature impact test chamber

Wet Wipes

Wet Wipes,Wet Tissue Paper,Wet Tissue Wipes,Eco Friendly Wet Wipes

C&S PAPER CO ., LTD , https://www.cstissue.com

Posted on