Is the shower blocked? After using this trick, it’s like new.

After prolonged use shower head water hole, easily scale from clogging live, resulting in poor water. At this time, there is no need to buy a new shower head, just need to clean the shower head to restore the original shape and continue to use. Let's take a look at the cleaning methods and precautions for clogging shower heads.

1. Cleaning and maintenance methods of shower heads

(1) Disassemble the nozzle in vinegar, soak for about one and a half hours, then gently brush the scale and scale with a brush.

(2) If there is a hard water sediment blocking the water outlet, the lemon head is used to scrub the blocked nozzle.

(3) If the shower is blocked by some small holes, first release the water and see which holes are blocked at the bottom. Prepare a needle and puncture the hole in the perforation with a needle that has just been seen without water until there is no impurities in the hole.

(4) Frequently use a soft cloth to stick a little flour to wipe the surface of the shower, then rinse with water to make the surface of the shower shine as new.

2. Precautions for cleaning the shower head.

(1) Pay attention to yourself and product safety when disassembling the shower.

(2) The filter gasket should not be too large or too thin, too large may not have the effect of filtration, too fine may affect the flow, the size of the filter is preferably 40-60 mesh.

(3) Strong acid should not be used when removing scale, so as to avoid corrosion on the shower surface.

(4) Do not disassemble the shower for maintenance. Improper disassembly will damage the appearance and internal structure of the product.

(5) The ambient temperature of the shower should not exceed 70C. The high temperature and ultraviolet light will greatly accelerate the aging of the shower and shorten the service life of the shower. Therefore, the installation of the shower should be kept away from the heat source such as Yuba.

(6) The shower can not be installed directly under the Yuba, and the distance should be above 60CM.

(7) In order to ensure that the nozzle is not blocked, we should clean the shower head every six months or less.

(8) Do not completely disassemble the shower head into pieces. It is only necessary to disassemble and clean the shower head.

I hope that reading this can help you. Want to know more about the home, please continue to pay attention to the decoration home.

More related wonderful reading:

Shower head cleaning method, shower head, purchase instructions

Shower head cleaning method shower head selection skills

Pet Thinning Scissors

Pet Thinning Scissors,Small Teeth 440C Pet Scissors,Pet Styling Scissors,Pet Grooming Scissor Kit

Zhangjiagang Mister Tools Co., Ltd , https://www.mingshitools.com