![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Product name: Steel centre bench(lab furniture)
Type:Â JH-SL017
The size can be custom-made requested by customers.
A. Worktop:Â The worktop is based on the requirement of customers such as phenolic resin board, epoxy resin board or ceramic board. The edge of worktop will be treated specially to ensure its safety for human body.
D. Surface panel for door and drawer:Â The door is with double layer made of 1.0 BAOGANG cold rolled sheet. We can fill the sound insulation material into the inside space between two layers if it's required by customer. The drawer is shaped once made of bending cold rolled sheets. It's with excellent bearing capacity for the support of drawer. The sealed panel after bending connects with the outside drawer surface by self-drilling screws. It can prevent the crashing when closing the drawer and noise caused by abrasing the coated layer.
E. Bottom panel for cabinet body:Â The bottom panel is formed once with reinforcing ribs to increase its bearing capacity and prevent the deforming of steel layers.
F. Handle:Â Stainless steel U-type handle or long handle shaped once made of steel.
G. Movable back panel:Â Movable and free dissembling structure which is convenient for checking water, electricity and gas pipe etc.
H. Movable layer:Â It's with reinforcing rib inside to increase its bearing capacity to avoid deforming. It can be dissembled freely and the height can be adjusted.
I. Hinge:Â Using durable DTC 90 degree or 304 stainless steel hinge which can be used for long time.
J. Drawer sliding rail:Â Using 3-joints bearing drawer rail with noise reduction, it can ensure the full opening for the drawer with good bearing capacity and without deforming.
K. Shelf:Â The shelf is made of steel frame and steel hanging pieces. The layer is made of toughened glass which is suitable to put all kinds of chemicals on it.
1, Mosquito Swatter :contain AA Battery operated
mosquito swatter, USB Rechargeable Mosquito Swatter,no light
Rechargeable Mosquito Swatter,with light rechargeable mosquito
swatter,With Torch Rechargeable Mosquito Swatter,plastic fly swatter.
A, Battery Mosquito Swatter
non-rechargeable battery mosquito swatter which is
powered by installing two AA batteries, just for swatting the annoying
bugs, mosquitoes, flies, etc. While pressing the zap button, you will
hear a satisfying `ZAP` and see a small blue flash. Watch as the
offending insect is instantly electrocuted! Use indoors to keep your
home or office clear of annoying bugs. Also perfect for gardening,
camping, fishing, barbecue and other outdoor activities!
Method of use:
1. Before using the battery into the handle
2. Need to hit the flies, on target, press the switch, flies killed immediately, please remove the batteries when not in use
3. The battery discharge to mosquito swatter, lights flashing,need to replace the batteries
B,Rechargeable mosquito swatter
Main features:
1, Plug-in: this configuration contain one piece 4V 500mAh rechargeable
high quality batteries , can Charging circuit more than 600 times,
economical and strong practicability
2,Double speed: this racket with pioneering double discharge circuit, warm up to 2300 V, Instant electric dead mosquitoes
3,Not hemp electricity: shoot to kill mosquito as a vampire and
harmless to the human body. This product built-in discharge resistance,
when the hand touch, light touch net surface also do not have hemp
inductance, safe and practicability
4,No leakage: this film is composed of special three layer network,
flies fly into extremely easily, and do not slip through (on both sides
by barbed wire, Intranet for aluminum mesh)
5,Rechargeable Mosquito Swatter With Torch and flash light: the swatter
have different bottom and switch to control the function,the torch
normally type can be divided and rechargeable.on the torch different
type can with different piece LED.
Method of use:
1,The rechargeable battery can operate 8 to 12 hours, and can charge the battery cycle 600 times
2,Need to hit the flies, on target, press the switch, the flies killed instantly, please switch off when not in use
3,The battery discharge to mosquito swatter, lights flashing, namely recharge 6-10 hour
4,After use the mosquito swatter,you need take metal to discharge the
work-net electric. Otherwise when you touch the work metal net,you will
be electrocuted by the rest of the electric.
Notice:
A. Do not treat it as a toy for children.
B. Do not press switch and touch electroform mesh when it is on charging.
C. Do not use it at the places where flammable gas or liquid existed.
Do not frequently use metal wares like conductive objects to strike
fire on mesh.
D. Please keep the electric source switch at OFF position when you don`t use it.
E. Can`t be washed or scrubbed with wet wash-cloth. Dead mosquito on mesh can be brushed off or shaken off.
F. Please charge it in time when electric power is used up. The
charging time should be no more than 16 hours.Charge it more than 6~8
hours every store of 3 months if it is not used for a long time, and
keep it in dry place away from damp.
Mosquito Swatter
Electric Mosquito Killer, Electric Mosquito Swatter, Mosquito Bat, Mosquito Racket
ZHEJIANG ZHOUHE TECHNOLOGY CO.,LTD , http://www.zohetech.com