![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
[ Chinese wardrobe net ] Five-door wardrobe is the first choice for most families because of its unique design and convenient assembly. For the hands-on friend, install a five-door wardrobe according to the installation procedure of the five-door wardrobe. There is no small sense of accomplishment. Xiaobian today to share with you is the installation steps of the five-door wardrobe.
Five-door wardrobe installation steps
The overall installation steps are first in the middle and then in the last four weeks. (Difficulty level: medium)
Suggested number: two people. Tools: Phillips screwdriver, newspaper or carton, etc., laid on the ground.
The number of assembled wardrobes: 4 general four-door wardrobes, five-door wardrobes, and five.
1. Separate the classification of each board separately: the outer box of the carton is written: 2 wardrobe back panels, 4 wardrobe panels (with painted lacquer handles), and 3 side panels of the wardrobe cabinet (the short one is the middle of the wardrobe) Side panel), 1 wardrobe floor (both screws on both sides), 1 wardrobe top, 4 base panels (2 long and 2 short), 4 wardrobe partitions (some high-value wardrobes) Equipped with drawers or pants rack assembly. Hardware. (including long screws, rafts, hinges, link screws, etc.)
2. If there are separate drawers and pants racks, separate these small internal parts and assemble them. Put it aside.
3. Find out the four base combination plates and base plate, screw in the black screw link, tighten the screws, and tighten the base plate and base link.
4. Screw the screw holes on the base into the black screws and metal screws (the metal screws are connected to the back plate), and screw the middle side plate and the back plate at the same time into the corresponding holes. Note: If the length of the connecting screw is long, pay attention to the length and thickness of the connecting piece, connect the back plate and the side plate to be shorter and thinner, and the other one is longer)
5. First locate the side panel in the middle panel of the cabinet (put it in the middle side panel, there are holes on both sides for the partitions on both sides), then place the back panel on the ground and connect them to each other. , tighten.
6. At the same time, put other partitions in other closets, etc., and pay attention to the direction and the corresponding grid. At this point, the cabinet is basically installed.
7. Connect the bottom of the wardrobe to the cabinet and tighten it.
8. Combine the base of the wardrobe, then connect the assembled base to the bottom of the wardrobe and tighten.
9. Connect the locker to the cabinet and tighten it.
10. Set up a wardrobe and install a wardrobe door.
11, hard work, you're done.
Foam Pillow ,Foam Wedge Pillow,Latex Foam Pillow,Memory Foam Neck Pillow
Foshan Dream Tech Co.,Ltd , https://www.luxsleepmaster.com